UPG2022T5G nec's 4.8 to 5.85 ghz high power gaas mmic spdt switch california eastern laboratories ? operating frequency: f = 4.8 to 5.85 ghz ? low insertion loss: 0.8 db typ. @ f = 4.9 ghz 0.7 db typ. @ f = 5.2 ghz 0.8 db typ. @ f = 5.8 ghz ? power handling: p in (0.1 db) = +31 dbm typ. @ f = 4.8 to 5.85 ghz ? control voltage: v cont = +2.8 v/0 v ? high isolation: (between input and output) = 23 db typ. @ f = 5.2 ghz (between output1 and output2) = 22 db typ . @ f = 5.2 ? input/output return loss: 10 db min. @ f = 4.8 to 5. 85 ghz ? switching speed: 2 0 ns @ t rise /t fall (10/90% rf) ? 6-pin plastic son package: (2.0 3.0 0.75 mm) ? lead free features data sheet ordering information remark to order evaluation samples, contact your nearby sales of?ce. part number for sample order: UPG2022T5G nec's UPG2022T5G is a high power gaas mmic spdt (single pole double throw) switch. this device can operate from 4.8 to 5.85 ghz with low insertion loss. it is housed in a 6-pin plastic son package. description ? 5 ghz band wlan ? 5 ghz cord less phones ? 5 ghz electronic toll collection ? 5 ghz fixed wireless access applications part number package marking supplying form UPG2022T5G-e1-a 6-pin plastic son g4h ? embossed tape 8 mm wide ? pin 1 face the perforation side of the tape ? qty 3 kpcs/reel
UPG2022T5G pin connections absolute maximum ratings (t a =+25oc, unless otherwise speci?ed) parameter symbol ratings unit switch control voltage v cont ? 6.0 to +6.0 note v input power p in +36 dbm operating ambient temperature t a ? 45 to +85 c storage temperature t stg ? 55 to +150 c notes | v cont1 ? v cont2 | 6.0 v 3 2 1 4 5 6 (top view) g4h 4 5 6 3 2 1 (bottom view) pin no. pin name 1 output1 2 gnd 3 output2 4 v cont2 5 input 6 v cont1 parameter symbol min. typ. max. unit switch control voltage (h) v cont (h) 2.7 2.8 3.3 v switch control voltage (l) v cont (l) ? 0.2 0 0.2 v operating frequency f 4.8 5.85 ghz operating ambient temperature t a ? 40 +25 +85 c recommended operating range ( t a =+25oc, unless otherwise speci?ed)
UPG2022T5G electrical characteristics (t a = +25 c, v cont = 2.8 v/0 v, z o = 50 , dc blocking capacitors = 27 pf, each port, unless otherwise speci?ed) parameter symbol test conditions min. typ. max. unit insertion loss l ins f = 4.9 ghz ? 0.8 1.1 db f = 5.2 ghz ? 0.7 1.1 db f = 5.8 ghz ? 0.8 1.1 db isolation 1 (between output1 and output2) isl1 f = 4.9 ghz 13 18 ? db f = 5.2 ghz 15 22 ? db f = 5.8 ghz 15 20 ? db input return loss rl in f = 4.9 ghz 10 22 ? db f = 5.2 ghz 10 29 ? db f = 5.8 ghz 10 19 ? db output return loss rl out f = 4.9 ghz 10 21 ? db f = 5.2 ghz 10 29 ? db f = 5.8 ghz 10 20 ? db 0.1 db gain compression input power p in (0.1 db) f = 4.9 to 5.8 ghz 30 31 ? dbm switching control speed t sw t rise /t fall (10/90% rf) ? 20 ? ns switching control current i cont ? 0.5 1 a standard characteristics for reference (t a = +25 c, v cont = 2.8 v/0 v, z o = 50 , dc blocking capacitors = 27 pf, each port, unless otherwise speci?ed) parameter symbol test conditions min. typ. max. unit isolation 2 (between input and output) isl2 f = 4.9 ghz ? 18 ? db f = 5.2 ghz ? 23 ? db f = 5.8 ghz ? 21 ? db
upg20 22t5g evaluation circuit the application circuits and their parameters are for reference only and are not intended for use in actual design-ins. v cont 1 v cont 2 input 1 000 pf 1 000 pf 27 pf 6 5 4 1 2 3 output1 output2 27 pf 27 pf truth table of switching by condition of control voltage v cont1 v cont (h) v cont (l) v cont2 v cont (h) input output1 output2 note input output1 output2 v cont (l) input output1 output2 input output1 output2 note note in case of v cont1 = v cont2 = high or v cont1 = v cont2 = low, (that is same control voltage for both pins), input signal of input (pin 5) is output from output1 (pin 1) and output2 (pin 3).
upg20 22t5g package dimensions 6-pin plastic son (unit:mm) 2.0 3.0 0.750.1 (bottom v iew) 0.95 0.95 0.35 +0.07 -0.0 5 0.70.1 0.19 0.70.1 0.290.1 0.290.1 0.25 +0.07 -0.0 5
upg2 0 22t5g recommended soldering conditions this product should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recommended below, contact your nearby sales of?ce. soldering method soldering conditions condition symbol infrared re?ow peak temperature (package surface temperature) : 260 c or below time at peak temperature : 10 seconds or less time at temperature of 220 c or higher : 60 seconds or less preheating time at 120 to 180 c : 120 30 seconds maximum number of re?ow processes : 3 times maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below ir260 vps peak temperature (package surface temperature) : 215 c or below time at temperature of 200 c or higher : 25 to 40 seconds preheating time at 120 to 150 c : 30 to 60 seconds maximum number of re?ow processes : 3 times maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below vp215 wave soldering peak temperature (molten solder temperature) : 260 c or below time at peak temperature : 10 seconds or less preheating temperature (package surface temperature) : 120 c or below maximum number of ?ow processes : 1 time maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below ws260 partial heating peak temperature (pin temperature) : 350 c or below soldering time (per side of device) : 3 seconds or less maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below hs350 caution do not use different soldering methods together (except for partial heating). life support applications these nec products are not intended for use in life support devices, appliances, or systems where the malfunction of these prod ucts can reasonably be expected to result in personal injury . the customers of cel using or selling these products for use in such applications do so at their own risk and agree to fully indemnify cel for all damages resulting from such improper use or sale. a business partner of nec compound semiconductor devices, ltd. 05/18/2004
4590 patrick henry drive santa clara, ca 95054-1817 telephone: (408 ) 9 19-250 0 facsimile : ( 40 8 ) 988-0279 subject: compliance with eu directives cel certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of european union (eu) directive 2002/95/ec restriction on use of hazardous substance s i n electrical and electronic equipment (rohs) and the requirements of eu directive 2003/11/ec restriction on penta and octa bde. cel pb-free products have the same base part number with a suffix added. the suffix Ca indicates that the device is pb-free. the Caz suffix is used to designate devices containing pb which are exempted from the requirement of rohs directive (*). in all cases the devices have pb-free terminals. all devices with these suffixes meet the requirements of the rohs directive. this status is based on cels understanding of the eu directives and knowledge of the materials that go into its products as of the date of disclosure of this information . restricted substanc e per rohs concentration limit per rohs (values are not yet fixed) concentration contained in cel devices -a -a z lead (p b) < 1000 ppm not detected (*) mercury < 1000 ppm not detected cadmiu m < 100 ppm not detected hexavalent chromiu m < 1000 ppm not detected pbb < 1000 ppm not detected pbde < 1000 ppm not detected if you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. important information and disclaimer: informatio n p rovided by ce l o n its website or in other communications concertin g the substan ce content of its products represents knowledge and belief as of the date that it is provided. cel bases its know ledge and belief on informatio n provided by thir d p arties and makes no representation or warrant y as to the accura cy of such information. efforts are underw ay to better integrate information from third parties. cel has taken and continues to take reasonable steps to provide representative and ac curate information but ma y not have conducted destructive testing or chemical analysis on incoming ma terials and chemicals. cel and ce l suppliers consider certain information to be propri etar y, and thus cas numbers and other limited information may not be availabl e for release . in no event shall cels liability arising out of such information exceed the total purchase price of the cel part(s) at issue s old by cel to customer on an annual basis. see cel terms and conditions for additional clarification of wa rranties and liabilit y.
|
